Collectors shopping for a wall display for the KICK Sauber C44 often run into one frustrating trap: confusing CaDA C64010 with LEGO 77247. Though both replicate the same iconic F1 livery, their overall dimensions, mounting points and frame requirements are completely separate. This guide focuses exclusively on the WETCEAOM 80 × 50 cm wall frame built for CaDA C64010, helping you avoid the common fit mistake that comes from matching only the team name.
Start your selection with the model number, not the team livery
Before you compare frames or check room layouts, pull out your set box or instruction manual and confirm the identifier C64010. If your build is LEGO 77247, this frame will not be a guaranteed fit, and you should move to the dedicated listing for that LEGO set. Visual similarities in the Sauber paint scheme do not translate to interchangeable display hardware.
Once you have confirmed you own the CaDA C64010, grab masking tape to mark the 80 × 50 cm footprint on your target wall. Step back and view the marked rectangle from your seating spot and the entryway of the room. Large F1 wall frames need breathing room; crowded shelves or nearby decor can obscure the car’s sidepods and rear wing, dulling the racing presentation you want.
Understand the core design of this CaDA wall frame
This WETCEAOM wall frame features a lightweight aluminum alloy structure, custom UV-printed backdrop and clear acrylic protective panel, built specifically around the stock profile of the CaDA C64010. It is designed for wall-mounted presentation, not a fully enclosed tabletop case. The frame is engineered to highlight the flat front-facing silhouette of the Sauber C44, ideal for hobby studios, man caves and private brick collection rooms.
When planning placement, keep the frame away from high-traffic zones. Avoid spots where bags, controllers or jackets regularly brush against the acrylic surface. For collectors building a full F1 wall series, leave consistent gaps between frames so each race car retains its own identity. You can explore more F1 display solutions in our Sauber motorsport collection.
Installation and upkeep tips for long-term display
Take time to level the frame before securing it to the wall. Always use wall anchors rated for your wall type, as the combined weight of the frame and finished CaDA C64010 model adds up. When positioning the assembled car inside the frame, lift and support the chassis rather than gripping the delicate wings and aerodynamic add-ons. Routine maintenance is simple: use only a soft dry microfiber cloth on the acrylic panel, and skip spray cleaners that can leave permanent haze or micro-scratches.
If you modify your CaDA C64010 with custom wings, extended tires or an alternate pose, stop before ordering. Send photos and full finished measurements to our support team at info@wetceaom.com for a compatibility check, rather than trying to force a fit after delivery.
FAQ
Does this 80×50cm frame fit the LEGO 77247 KICK Sauber C44?
This frame is engineered for CaDA C64010. LEGO 77247 has different dimensions and mounting geometry. Compatibility is not guaranteed, and you must contact our support team to verify before purchase.
What counts as the 80 × 50 cm measurement on the listing?
80 × 50 cm refers to the outer footprint of the finished wall frame. If your C64010 has custom modifications, share your build dimensions with us to confirm internal clearance works for your setup.
Can custom parts or modified poses stop the C64010 from fitting correctly?
Yes. Aftermarket wings, extended tires or repositioned aerodynamic elements can increase the overall width and depth of the model. Always send photos and measurements for modified builds before checkout.
How do I safely clean the acrylic protective panel?
Only use a clean microfiber cloth for dry wiping. Avoid alcohol sprays, window cleaners and paper towels, which will scratch or cloud the transparent acrylic surface over time.
Can I get a custom-sized wall frame for other modified F1 builds?
Absolutely. Our custom-made display frame collection supports custom dimensions for MOCs, modified race car models and sets without standard pre-built frames.
